Hitec HSB-9485SH Brushless 26.0kg 0.15s
1 495 SEK/styck
- Bra Brushless servo för flyg och bil
- Står det "Beställningsvara", maila oss så kollar vi upp leveranstiden!
- Öppet i butik och telefon mellan 9-18 Vardagar samt 10-15 (OBS Ny tid) på Lördagar*, ring +46 (0) 303-776303
* Vi kan vara upptagna, ring igen om vi inte svarar!
Beskrivning
Art.nr: HSB-9485SH
Hitec HSB-9485SH Brushless 26.0kg 0.15s
Pro level hobbyists demand the power and precision found in our triple threat HSB-94XX servos. Each one is designed with our durable steel gears and impressive Neu brushless motors with the HSB-9485SH bringing immense torque.
NOTICE: Please read this service bulletin regarding Hitec brushless servos with certain RC devices.
Features
- Programmable 12-Bit PWM Digital Amplifier
- Custom Long Life Brushless Motor
- 1M Cycle Long Life Potentiometer
- Constant Output Torque
- Wide Operating Voltage (5 ~ 9 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- Dust Resistant and Splash Proof Case
- 25-Tooth Output Spline
- Nylon Reinforced Plastic Case
- Ultra Low Power Consumption
Programmable Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Data Save / Load
- Program Reset (From File)
Accessories
- Steel Gears Set
- Metal / Karbonite 1st Gear Set
- Plastic Case Set
- Applicable Horns
HS-9485SH Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 6.0V ~ 7.4V |
| Speed (Second @ 60°) | 0.18 ~ 0.15 |
| Maximum Torque Range oz. / in. | 361 |
| Maximum Torque Range kg. / cm. | 26.0 |
| Current Draw at Idle | 30 mAh |
| No Load Operating Current Draw | 430 mAh |
| Stall Current Draw | 1,100 mAh |
| Dead Band Width | 1 µs |
| Physical Specifications | |
| Dimensions (Inches) | 1.57 x 0.78 x 1.45 |
| Dimensions (Metric) | 40.0 x 20.0 x 37.0 |
| Weight (Ounces) | 2.19 |
| Weight (Gram) | 62.0 |
| Circuit Type | EBL Digital |
| Motor Type | NeuCastle Brushless |
| Gear Material | Steel |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | H25T |
| Case Material | Plastic |
| Dust / Water Resistance | Splash Proof |
| Connector Gauge (AWG) / Strand Count | 20 / 80 |
- VarumärkeHitec