Losi 1/8 8IGHT 4WD Nitro Buggy RTR Röd/Gul
- Står det "Beställningsvara", maila oss så kollar vi upp leveranstiden!
- Öppet i butik och telefon mellan 9-18 Vardagar samt 10-15 (OBS Ny tid) på Lördagar*, ring +46 (0) 303-776303
* Vi kan vara upptagna, ring igen om vi inte svarar!
Beskrivning
Art.nr: LOS04010V2
Overview
If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.
Features
- Your fast track to nitro buggy racing
- Spektrum SLT 3-Channel SLT Radio System
- Spektrum SLR300 Surface Receiver
- Spektrum S614 Waterproof Metal Gear Surface Servo, 23T
- 4mm 6061-T6 Aluminum Chassis Plate
- Gen III radio tray for longer servo life
- Dynamite® .21 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
Video Overview
Race-Proven Durability
In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Product Specifications
| Approximate Assembly Time | No assembly required |
| Body | Screen printed, cab forward design |
| Brakes | Composite disc with steel pads |
| Chassis | 4mm 6061 T-6 aluminum |
| Completion Level | Ready-To-Run |
| Drivetrain | 4WD |
| Product Height | 7.1" (180 mm) |
| Battery | Included |
| Fuel Tank Capacity | 4.2oz (125cc) |
| Ground Clearance | 2.4" (60mm) |
| Internal Gear Ratio | 3.92:1 |
| Product Length | 19.6" (498 mm) |
| Spur Gear | 50T |
| Suspension | Independent |
| Power Type | Nitro |
| Gear Pitch | 1.0 MOD |
| Servos | Included |
| Pinion | 17T |
| Scale | 1/8 |
| Product Weight | 7.8lbs (3.5kg) |
| Vehicle Type | Buggy |
| Water-Resistant | Yes |
| Final Drive Ratio | 11.5:1 |
| Rear Track | 12.1" (307mm) |
| Wheelbase | 12.7" (323 mm) |
| Charger | Sold Separately |
| Differential | Sealed, viscous filled |
| Receiver | Included |
| Shock Type | 16mm Big-Bore, aluminum body, oil-filled |
| Front Track | 12.1" (307mm) |
| Vehicle Size | Standard |
| Product Width | 12.1" (307 mm) |
| Radio | Included |
- VarumärkeLosi