Temperature sensor MT125 (up to 125 ° C) for Jeti Duplex System 2.4EX
The MT 125 sensors are intended for temperature measurements of devices like motors, controllers, batteries and other accessories in the model. Presentation of the measured values ??the JETIBOX terminal and the wireless information transfer of the DUPLEX 2,4GHz system is used.
The duplex system used to communicate the 2.4GHz band, which allows not only the transfer of control data to the model, but also in the reverse direction to the transmitter. The obtained during operation telemetric data is transmitted in real time and the current state of the data can be displayed on the JETIBOX LCD screen. The MT 125 unit records minimum and maximum temperatures of the individual sensors and delivers besides that their actual values.
To adjust the parameters and to display the measured values ??the JETIBOX terminal.
The MT 125 device consists of two parts. First, MT 125 from the actual module, which is used for data recording of the temperature sensors and which can be connected to the JETIBOX, the recipient or to the expander of the duplex system. The actual temperature measurement is performed by the sensors connected to the MT module. Make sure that the temperature of the module and the sensor does not exceed the allowable - see technical data table.
The MT 125 module allows for the individual sensors to trigger audible alarms. These alerts can be set as messages of excessive temperature or coolings adjusted limits. The acoustic signal is generated by the transmitter module DUPLEX Tx which contains a small siren. For better apart posture of each alarm type, these different by sending Morse code characters are distinguished. The acoustic signaling of parameter violations will be generated even when there is no JETIBOX. With the JETIBOX displays on its LCD screen, which parameter has been exceeded. If several parameters, the alarms and the display on the LCD screen of the JETIBOX alternate.
Technical specifications:
Operating Voltage: 3.5 - 8.4 V
Current consumption: ca. 7 mA
Dimensions: approximately 19x14x4 mm
Weight: approx 10 grams
Temperature sensors: -55 ° C - + 125 ° C
Precision sensors: 0.5%
Operating temperature: -10 ° C - 85 ° C
All specifications represent the manufacturer's instructions! Errors, misprint, price changes and delivery reserved.