PRO-Version with Bluetooth. Wireless PC communication for data readout and programming of settings!
Receiver switch for receiver "diversity" with receivers you trust in
Failsafe operation with automatic switch-over between two receivers with up to 16 channels each
Teacher/student (master/slave) mode with manual switch-over between teacher and student using a simple switching channel of the transmitter possible
„Pilot backup" by using two different frequencies (2 transmitters, 2 receivers) possible
Receiver/autopilot switch-over for UAVs
All control functions kept in place when switching from one receiver to the other
Free programmable failsafe positions for the switch-over
Operation with only one receiver possible as well (programmable)
Pulse-voltage recognition starting at 1.6 volts signal amplitude using integrated pulse amplifiers
Integrated Bluetooth-interface for data readout and programming and for updating the software (firmware)
The internal data logger stores all relevant parameters of the last 32 flights and can be read out with a PC via Bluetooth later
2 x 16 receiver channels leads to 16 servo outputs
Integrated two-colored LEDs to monitor the system state
Integrated buzzer for an acoustical error indication
2 failsafe channels for evaluating the receiver function
Dual battery supply:
Integrated LiPo-capable dual current supply with voltage regulation and selectable output voltage
Stabilized output voltage selectable in 3 steps (5.3V / 5.6V / 5.9V)
Additional voltage output with full battery voltage for high voltage servos (7.4V)
Fail-proof electronically switches with proven pin switch actuator
Large area aluminum heat-sink for optimal heat deflection
Especially suitable for usage of LiPo batteries in receiver sets, but also for 5-cell NiCd/NiMH batteries, A123 batteries, LiIon batteries
Continuous current 8A, peak current 50A
Five high power semiconductors in voltage regulator for optimal safety
With the DPSI LCD all parameters, such as voltages, currents, capacities etc. are displayed!
Integrated protection circuitry against dynamo effect (voltage peaks generated by some servos)
Cableless system, i.e. all connections are pluggable and can be changed any time
Special grounding concept for interference-free operation and best safety
Future-proof concept due to several extensions (DPSI LCD, DPSI power, external sensors etc.)
Each system tested completely in all functions before delivery
PRO-Version with additional features:
Additional data logger recording all relevant parameters of last flights
Recording of voltage, curren, receiving quality as well as errors every single second
Recording duration of arbitrary number of flights up to 2 hours
Memory is 128 times larger than that of the normal DPSI TWIN Mini version
Bluetooth radio transmission of all data! Using the delivered USB-Bluetooth adaptor, all PC-relevant settings can be accomplished WITHOUT any cables - simply position the model close to your PC and all actions are carried out in a wireless fashion up to a range of 10 meters!
Communication is also possible without the USB adapter when using Bluetooth compatible PC / Notebook